Parti

Nessuna parte richiesta.

Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top. Second photo gives a view from the back of the phone and battery.
  • Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top.

  • Second photo gives a view from the back of the phone and battery.

Aggiungi Commento

Remove the 4 (4.7mm) philips head screws.
  • Remove the 4 (4.7mm) philips head screws.

Aggiungi Commento

Unplug the rubber charger outlet cover.
  • Unplug the rubber charger outlet cover.

Aggiungi Commento

Unplug the rubber headset jack cover.
  • Unplug the rubber headset jack cover.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Begin by inserting the pry tool near the charger jack. There are 4 tabs to release.
  • Begin by inserting the pry tool near the charger jack.

  • There are 4 tabs to release.

    • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

  • Loosen the 2 side tabs before moving on to the top two.

  • See the second photo to see location of the tabs.

  • Be careful of the ribbon wires shown in second photo.

Aggiungi Commento

Once the two side tabs are free; gently pry the white backing down to release the top two tabs. Hold the phone with the left hand as shown
  • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

  • Hold the phone with the left hand as shown

  • Wiggle the white backplate from side to side while pulling down with the right hand.

  • Be careful of the ribbon wires shown in second photo.

Aggiungi Commento

Remove the ribbon wires connecting to the screen using the pry tool.
  • Remove the ribbon wires connecting to the screen using the pry tool.

Aggiungi Commento

2 tabs hold the motherboard in place.
  • 2 tabs hold the motherboard in place.

  • Release the labeled tabs with the pry tool from the location shown.

Aggiungi Commento

Separate the motherboard from the phone.
  • Separate the motherboard from the phone.

Aggiungi Commento

Solder connections are accessable to replace the Chargers Jack.
  • Solder connections are accessable to replace the Chargers Jack.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Membro da: 05/01/2011

1.031 Reputazione

20 Guide realizzate

Team

Cal Poly, Team 3-40, Regan Winter 2011 Membro di Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,502