Introduzione

Use this guide to replace your Samsung SGH A707 phone's display.

Press on the markings on the cover and pull it down to reveal the battery.
  • Press on the markings on the cover and pull it down to reveal the battery.

Aggiungi Commento

Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.
  • Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.

Aggiungi Commento

Here is the phone without the battery.
  • Here is the phone without the battery.

Aggiungi Commento

Unscrew the six screws on the back of the phone using the Phillips #0 screw driver. Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.
  • Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.

Aggiungi Commento

Use the prying tool the pry off the phone's plastic frame.
  • Use the prying tool the pry off the phone's plastic frame.

Aggiungi Commento

Use the prying tool to disconnect the rectangular connector. Use the prying tool to disconnect the rectangular connector. Use the prying tool to disconnect the rectangular connector.
  • Use the prying tool to disconnect the rectangular connector.

Aggiungi Commento

Use the prying tool to disconnect the small connector.
  • Use the prying tool to disconnect the small connector.

Aggiungi Commento

Gently pull off the circuit board.
  • Gently pull off the circuit board.

Aggiungi Commento

Here is the phone without the logic board.
  • Here is the phone without the logic board.

Aggiungi Commento

Use the Phillips #0 screw driver to remove the two screws. Place the screws in a safe place.
  • Use the Phillips #0 screw driver to remove the two screws.

  • Place the screws in a safe place.

  • Use the prying tool to gently pry the screen off, by slowly moving the prying tool around the entire edge of the screen (roughly highlighted with a red rectangle). You must be very gentle, otherwise the screen will crack.

Aggiungi Commento

Now we have access to the camera.
  • Now we have access to the camera.

  • We also have access to the speakers.

  • Disconnect the flat cable to separate the two pieces.

Aggiungi Commento

Samsung SGH A707
  • Samsung SGH A707

Aggiungi Commento

Separate the two flaps to make handling easier.
  • Separate the two flaps to make handling easier.

  • Use a screw driver to press a latch in along the axis of the hinge and simultaneously pull the pieces apart.

  • Gently pull the flat cable through the hinge.

Aggiungi Commento

Use the prying tool to separate the screen from the rest of the phone.
  • Use the prying tool to separate the screen from the rest of the phone.

  • Be careful not to lose the little cube of foam and wire that is under the circuit board. It is important in connecting two different circuits and must be placed back when the phone is reassembled.

Aggiungi Commento

Samsung SGH A707 Samsung SGH A707
  • Samsung SGH A707

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

yfm

Membro da: 06/11/2012

10 Reputazione

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,033