Introduzione

This guide will show you how to get access to the LCD screen in order to clean or replace it.

Slide your fingernail into the slit at the bottom of the phone to remove the back cover.
  • Slide your fingernail into the slit at the bottom of the phone to remove the back cover.

Aggiungi Commento

Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.
  • Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.

Aggiungi Commento

Remove six 5 mm Phillips #0 screws from the back of the phone.
  • Remove six 5 mm Phillips #0 screws from the back of the phone.

Aggiungi Commento

Insert a plastic opening tool into the seam between the back case and the rest of the phone.
  • Insert a plastic opening tool into the seam between the back case and the rest of the phone.

  • Working along the seam, pry the back from the phone.

Aggiungi Commento

Use a plastic opening tool to disconnect the camera cable from the motherboard. Carefully remove the camera from the phone.
  • Use a plastic opening tool to disconnect the camera cable from the motherboard.

  • Carefully remove the camera from the phone.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Remove the two remaining 3.75 mm Phillips screws.
  • Remove the two remaining 3.75 mm Phillips screws.

Aggiungi Commento

Firmly grip the black lever with tweezers Use the tweezers to flip the black lever up so that it is perpendicular to the motherboard.
  • Firmly grip the black lever with tweezers

  • Use the tweezers to flip the black lever up so that it is perpendicular to the motherboard.

Aggiungi Commento

Carefully use the tweezers to slide the black ZIF cable out of the socket.
  • Carefully use the tweezers to slide the black ZIF cable out of the socket.

Aggiungi Commento

Use the tweezers to unclip the black connector as shown. Use the tweezers to unclip the black connector as shown.
  • Use the tweezers to unclip the black connector as shown.

Aggiungi Commento

Use the tweezers to unclip the orange flexible circuit board from the side of the phone. Use the tweezers to unclip the orange flexible circuit board from the side of the phone.
  • Use the tweezers to unclip the orange flexible circuit board from the side of the phone.

Aggiungi Commento

Use the tweezers to unclip the other orange, smaller flexible circuit board.
  • Use the tweezers to unclip the other orange, smaller flexible circuit board.

  • Work carefully. This is a very delicate part of the phone that can easily be broken.

Aggiungi Commento

Slide one side of the tweezers underneath the red and blue wires of the capacitor. Carefully apply pressure away from the phone to lift.
  • Slide one side of the tweezers underneath the red and blue wires of the capacitor.

  • Carefully apply pressure away from the phone to lift.

Aggiungi Commento

Carefully tilt the motherboard up from the back of the phone. Don't remove the motherboard completely. There is one more clip on the backside of the motherboard that needs to be removed.
  • Carefully tilt the motherboard up from the back of the phone.

  • Don't remove the motherboard completely. There is one more clip on the backside of the motherboard that needs to be removed.

  • Use tweezers to unclip the black connector.

Aggiungi Commento

Hold the phone by the black plastic at the ends and slightly bend them down so that the middle of the phone is the highest point. Apply pressure slowly until the until the grey portion pops off. Hold the phone by the black plastic at the ends and slightly bend them down so that the middle of the phone is the highest point. Apply pressure slowly until the until the grey portion pops off.
  • Hold the phone by the black plastic at the ends and slightly bend them down so that the middle of the phone is the highest point. Apply pressure slowly until the until the grey portion pops off.

Aggiungi Commento

Insert the tweezers into the hole as shown so that they are wedged between the LCD and grey plastic. Slide the tweezers underneath the LCD, around the three silver edges, until the entire display is lifted from grey plastic. Slide the tweezers underneath the LCD, around the three silver edges, until the entire display is lifted from grey plastic.
  • Insert the tweezers into the hole as shown so that they are wedged between the LCD and grey plastic.

  • Slide the tweezers underneath the LCD, around the three silver edges, until the entire display is lifted from grey plastic.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Morgan Yost

Membro da: 08/04/2013

46 Reputazione

12 Guide realizzate

Team

Cal Poly, Team 17-1, Regan Spring 2013 Membro di Cal Poly, Team 17-1, Regan Spring 2013

CPSU-REGAN-S13S17G1

4 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,784