Parti

Nessuna parte richiesta.

Remove batteries before you disassemble the remote Use a case opening tool to gently split the upper and lower case Work around the entire case until the 2 halves come apart completely
  • Remove batteries before you disassemble the remote

  • Use a case opening tool to gently split the upper and lower case

  • Work around the entire case until the 2 halves come apart completely

Aggiungi Commento

Release the circuit board by gently pushing the plastic tab away from the board Use minimal force to avoid breaking it
  • Release the circuit board by gently pushing the plastic tab away from the board

  • Use minimal force to avoid breaking it

  • Lift circuit board off top cover to expose the rubber button membrane

  • Lift off the rubber button membrane

Aggiungi Commento

During reassembly make sure that you correctly place the battery cover retainer on the read case During reassembly make sure that you correctly place the battery cover retainer on the read case
  • During reassembly make sure that you correctly place the battery cover retainer on the read case

Aggiungi Commento

When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover
  • When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Richdave

Membro da: 09/04/2010

27.525 Reputazione

37 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

274 Membri

713 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 66

Ultimi 30 Giorni: 249

Tutti i Tempi: 20,328