Introduzione

How to remove & replace the phone's back cover.

Parti

Nessuna parte richiesta.

Orient the phone with the screen facing down.
  • Orient the phone with the screen facing down.

  • Using your thumb, slide the back panel away from the camera to expose the battery.

Aggiungi Commento

Grip the battery on its sides, opposite the direction of the white arrow. Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.
  • Grip the battery on its sides, opposite the direction of the white arrow.

  • Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.

Aggiungi Commento

Remove the 6 outer screws.
  • Remove the 6 outer screws.

    • The screws should be 3.5 mm in length.

  • Put the screws in a safe place as they are very small and easy to lose.

Aggiungi Commento

Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.
  • Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.

    • It may help to slide the touchscreen upwards when removing the back panel.

  • The side buttons will become loose and are prone to fall out, so put these in a safe place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Saul Villatoro

Membro da: 25/04/2011

255 Reputazione

14 Guide realizzate

Team

Cal Poly, Team 8-10, Regan Spring 2011 Membro di Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Membri

22 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,552