Introduzione

Replace the midframe of your Samsung Galaxy S Vibrant or remove the midframe to access the phone's internal components.

Parti

Nessuna parte richiesta.

Locate the small slit on the bottom edge of the device between the back and front cases. Pop the back case off by inserting your finger and pulling the case away from the phone. If necessary (it shouldn't be), use the  Plastic Opening Tools to pry the back case off.
  • Locate the small slit on the bottom edge of the device between the back and front cases.

  • Pop the back case off by inserting your finger and pulling the case away from the phone.

Aggiungi Commento

Remove the battery by pushing the bottom edge of the battery up and away from the phone If you would prefer, you may use the  Plastic Opening Tools for this step as well.
  • Remove the battery by pushing the bottom edge of the battery up and away from the phone

Aggiungi Commento

Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.
  • Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.

Aggiungi Commento

Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.
  • Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.

Aggiungi Commento

Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe. Work carefully, and disengage all of the clips before removing the midframe. The power button and the volume control button on the sides of the phone will fall out when the midframe is removed.
  • Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe.

    • Work carefully, and disengage all of the clips before removing the midframe.

  • The power button and the volume control button on the sides of the phone will fall out when the midframe is removed.

Aggiungi Commento

Slide the SD card out of its slot. Slide the SD card out of its slot.
  • Slide the SD card out of its slot.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Krista Purser

Membro da: 17/01/2013

212 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 18-37, Regan Winter 2013 Membro di Cal Poly, Team 18-37, Regan Winter 2013

CPSU-REGAN-W13S18G37

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,401