Introduzione

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's input jack module.

  • Remove the back battery cover.

Aggiungi Commento

Remove the phone's battery.
  • Remove the phone's battery.

Aggiungi Commento

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Aggiungi Commento

Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Aggiungi Commento

Peel off the Identification sticker
  • Peel off the Identification sticker

Aggiungi Commento

Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
  • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

Aggiungi Commento

Pop the speaker plug out of its socket.
  • Pop the speaker plug out of its socket.

Aggiungi Commento

Peel the button sensor off the top of the case.
  • Peel the button sensor off the top of the case.

Aggiungi Commento

Peel the Input jack assembly out of the case.
  • Peel the Input jack assembly out of the case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sven

Membro da: 18/04/2011

28 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 15-11, Regan Spring 2011 Membro di Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,355