Introduzione

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's digitizer and screen.

  • Remove the back battery cover.

Aggiungi Commento

Remove the phone's battery.
  • Remove the phone's battery.

Aggiungi Commento

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Aggiungi Commento

Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Aggiungi Commento

It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.
  • It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.

  • Pull the antenna plug out of its socket.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out. Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out. Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.
  • Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

Aggiungi Commento

Pop the red hinged-release lever away from its ribbon. Then pull it out.
  • Pop the red hinged-release lever away from its ribbon. Then pull it out.

Aggiungi Commento

Peel the button sensor on the side of the motherboard off of the case.
  • Peel the button sensor on the side of the motherboard off of the case.

Aggiungi Commento

Slightly pull up one side of the motherboard. Pull the button/microphone plug out of its socket. Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
  • Slightly pull up one side of the motherboard.

  • Pull the button/microphone plug out of its socket.

  • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

Aggiungi Commento

You have successfully removed the motherboard from the phone.
  • You have successfully removed the motherboard from the phone.

Aggiungi Commento

Flip phone over so you are looking at the front screen of the phone. (The back is already taken off and parts removed)
  • Flip phone over so you are looking at the front screen of the phone. (The back is already taken off and parts removed)

Aggiungi Commento

Use a small tool to pry the digitizer and screen (together) from the frame of the phone. This may take some time and careful work because it is glued down to the frame. Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of. Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.
  • Use a small tool to pry the digitizer and screen (together) from the frame of the phone. This may take some time and careful work because it is glued down to the frame.

  • Be careful when you pull the lower part of this piece away from the phone frame because there is a ribbon attached to the digitizer that you don't want to break. There is also a ribbon on the side of the screen to be aware of.

Aggiungi Commento

Next, carefully pull the digitizer away from the screen. At this point you can replace either the screen or the digitizer. Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.
  • Next, carefully pull the digitizer away from the screen.

  • At this point you can replace either the screen or the digitizer.

  • Cleaning the screen with a glass cleaning cloth before reassembling will remove any smudges or fingerprints from disassembling the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Heather Behrend

Membro da: 20/04/2011

127 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 15-11, Regan Spring 2011 Membro di Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Membri

14 Guide realizzate

You did not mention how to glue the digitizer to LCD. That is a very important step.

cashyapan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 6,533