Introduzione

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.

  • Remove the back battery cover.

Aggiungi Commento

Remove the phone's battery.
  • Remove the phone's battery.

Aggiungi Commento

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Aggiungi Commento

Peel off the Identification sticker.
  • Peel off the Identification sticker.

Aggiungi Commento

Peel the button sensor on the side of the motherboard off of the case.
  • Peel the button sensor on the side of the motherboard off of the case.

Aggiungi Commento

Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
  • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

Aggiungi Commento

Peel up the camera attachment.
  • Peel up the camera attachment.

Aggiungi Commento

You will now be able to replace the Camera component with a new part.
  • You will now be able to replace the Camera component with a new part.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 15-11, Regan Spring 2011 Membro di Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,634