Introduzione

This guide tells you how to remove a faulty logic board and install a new one.

push down the back cover of the phone, then take it out.
  • push down the back cover of the phone, then take it out.

Aggiungi Commento

Remove the battery.
  • Remove the battery.

Aggiungi Commento

Remove the (4) 4.2 mm screws from the four corners of the battery slot.
  • Remove the (4) 4.2 mm screws from the four corners of the battery slot.

Aggiungi Commento

Use plastic opening tools to peel off plastic Verizon logo tab from the top of the back outside.
  • Use plastic opening tools to peel off plastic Verizon logo tab from the top of the back outside.

  • Note: The tab is stuck on there with glue, this is alright, just peel it off.

Aggiungi Commento

Remove the (3) newly uncovered 4.3 mm screws.
  • Remove the (3) newly uncovered 4.3 mm screws.

Aggiungi Commento

Remove the back outside casing using the plastic opening tool.
  • Remove the back outside casing using the plastic opening tool.

  • Warning: Do Not lose the buttons on the side of the phone, as they will come off of the phone when you remove the back outside casing.

Aggiungi Commento

Pull up on the yellow tab.
  • Pull up on the yellow tab.

Aggiungi Commento

Disconnect connecting cord using tweezers.
  • Disconnect connecting cord using tweezers.

Aggiungi Commento

Disconnect rectangular ribbon.
  • Disconnect rectangular ribbon.

Aggiungi Commento

Remove logic board.
  • Remove logic board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Chris

Membro da: 16/04/2011

133 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 12-35, Maness Spring 2011 Membro di Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 2,469