Salta al contenuto principale

SG 552-1 Commando Motor Replacement

Cosa ti serve

  1. SG 552-1 Commando Motor Replacement, Motor: passo 1, immagine 1 di 2 SG 552-1 Commando Motor Replacement, Motor: passo 1, immagine 2 di 2
    • Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.

    • Slide the cover off.

  2. SG 552-1 Commando Motor Replacement: passo 2, immagine 1 di 1
    • Pull the motor out from the inside of the hand grip.

    • Using a soldering iron and desoldering wick, desolder the wires from the motor.

  3. SG 552-1 Commando Motor Replacement: passo 3, immagine 1 di 1
    • Using a soldering iron, solder the wires onto the new motor.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Anika Morris

Membro da: 10/05/12

1 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 18-41, Regan Fall 2012 Membro di Cal Poly, Team 18-41, Regan Fall 2012

CPSU-REGAN-F12S18G41

6 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 757