Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Aggiungi Commento

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Aggiungi Commento

Continue to pull the components apart. For reassembly, put the silver encasing on before the the black cover. For reassembly, put the silver encasing on before the the black cover.
  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Aggiungi Commento

Locate the thermal cutout under the coils of the heating element.
  • Locate the thermal cutout under the coils of the heating element.

Aggiungi Commento

Test the thermal cutout for continuity using the multimeter.
  • Test the thermal cutout for continuity using the multimeter.

  • Make sure the multimeter is set to 200 ACV and bring the probes toward the thermal cutout.

  • If the numbers on the multimeter continue to change, the circuit is closed and properly functioning.

  • If the multimeter reads a consistent number, the circuit is opened and the thermal cutout needs to be replaced.

Aggiungi Commento

To replace the thermal cutout, use the spudgers to extract the object.
  • To replace the thermal cutout, use the spudgers to extract the object.

  • To remove, wedge it back and forth until it comes free.

  • You do not need to take out the gold piece, only the thermal cutout.

Aggiungi Commento

Replace the old thermal cutout with a new thermal cutout by snapping it into place.
  • Replace the old thermal cutout with a new thermal cutout by snapping it into place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Membro da: 18/09/2012

80 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 1-5, Propen Fall 2012 Membro di Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 1,430