Parti

Nessuna parte richiesta.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Aggiungi Commento

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Aggiungi Commento

Continue to pull the components apart. For reassembly, put the silver encasing on before the the black cover. For reassembly, put the silver encasing on before the the black cover.
  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Aggiungi Commento

The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.
  • The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.

  • Make sure that there are no breaks or debris obstructing the wires of the heating element.

Aggiungi Commento

To test the heating element, use a digital multimeter.
  • To test the heating element, use a digital multimeter.

  • Set the multimeter to 200 under ACV.

  • Bring the ends of the multimeter toward the two lead wires.

  • If the circuit between the wires is closed, the numbers on the multimeter should keep changing.

  • If the numbers are not changing, replace the heating element.

  • If the circuit is closed, check the thermal cutout.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Membro da: 18/09/2012

80 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 1-5, Propen Fall 2012 Membro di Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 991