Introduzione

How to disassemble the laptop in case to clean the cooling / fan system.


Please SUBSCRIBE to my channel ツ

Parti

Nessuna parte richiesta.

Panoramica Video

Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
  • Switch-off the laptop and remove the battery.

Aggiungi Commento

To remove the Keyboard you must open 7x locking clips. You can use a cutter and a plastic tool. You can use a cutter and a plastic tool.
  • To remove the Keyboard you must open 7x locking clips.

  • You can use a cutter and a plastic tool.

Aggiungi Commento

Remove the Keyboard. Remove the HDD, RAM Memory cover. Remove the HDD, RAM Memory cover.
  • Remove the Keyboard.

  • Remove the HDD, RAM Memory cover.

Aggiungi Commento

Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive.
  • Remove the HDD and the DVD optical drive.

Aggiungi Commento

Unscrew the screws from the upper and the bottom cases. Unscrew the screws from the upper and the bottom cases.
  • Unscrew the screws from the upper and the bottom cases.

Aggiungi Commento

With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop.
  • With a plastic tool you can separate the bottom case from the laptop.

Aggiungi Commento

Disconnect the CPU fan cable connector. Now you have 4x screws on the CPU side and 2x on the fan. Now you have 4x screws on the CPU side and 2x on the fan.
  • Disconnect the CPU fan cable connector.

  • Now you have 4x screws on the CPU side and 2x on the fan.

Aggiungi Commento

Separate the fan from the radiator. Clean the radiator and the fan. Use a soft brush. Clean the radiator and the fan. Use a soft brush.
  • Separate the fan from the radiator.

  • Clean the radiator and the fan. Use a soft brush.

Aggiungi Commento

Put thermal compose to the main CPU and you are ready for assembling. After the start-up, check if the fan works. .

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

153.600 Reputazione

430 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

277 Membri

724 Guide realizzate

Very good, thank you. :-)

andymcleod - Replica

I' thank you too. :)

ZFix -

Absolutely awesome job!

Thanks a plenty.

SolaJ

SolarJ - Replica

Can't you just leave fan assembly installed and start cleaning it with brush and compressed air once you have bottom case cover off? What about just blowing air thru the grill covering the fan and not even removing the bottom case cover?

bikeboatski - Replica

I just red it and found it's not for me. But i still felt I'd instantly send $1 to the author, besides those points, which i do not care of.

So I suggest to FIXIT.COM to offer it optionally. I meean... Optinally if you want you may send $1 or more to the author.... and I would put "1" ass default. I want it tobe JUST ONE CLICK. Otherwise I leave.

Jon Pol - Replica

Merci, j'ai réussi à ouvrir mon Toshiba grâce à ce tuto. J'ai dû changer le ventilateur qui était bruillant. http://ventilaptop.com/toshiba/580002-ve...

Hoti - Replica

Amazing, I’ve been wanting to open my laptop for months now this helped so much. Thank you

Nightcore Beats - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 14

Ultimi 7 Giorni: 118

Ultimi 30 Giorni: 458

Tutti i Tempi: 23,458