Introduzione

Owners of this headset are most likely aware of the rattling it makes when you move around. This is one of the biggest complaints of this headset and it can be easily fixed.

Remove the foam speaker cover. Locate (4) T5 Torx screws and remove.
  • Remove the foam speaker cover. Locate (4) T5 Torx screws and remove.

Aggiungi Commento

Remove (3) Phillips #000 screws.
  • Remove (3) Phillips #000 screws.

  • Remove circuit board

Aggiungi Commento

Optional, remove media buttons section by removing (3) Phillips #000 screws. Cut a circular piece of foam and stuff it under the center section.
  • Optional, remove media buttons section by removing (3) Phillips #000 screws.

  • Cut a circular piece of foam and stuff it under the center section.

  • You are now finished! Just reassemble

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

SYN1ST3R

Membro da: 06/03/2010

246 Reputazione

1 Guida realizzata

Please, can you help with silencing the low battery sound?

Houssam - Replica

OMG.. Best tutorial! I was looking at completing this and then stumbled upon your post.

The button rattle was driving me nuts!

TropiKalSTORM - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 40

Tutti i Tempi: 4,123