Salta al contenuto principale

Repairing Canon PowerShot Lens Error E-18

Cosa ti serve

  1. Repairing Canon PowerShot Lens Error E-18, Repairing Canon PowerShot Lens Error E-18: passo 1, immagine 1 di 1
    • Place camera lens facing upwards on the table.

    • Press and hold down the power button.

    • Simultaneously press down the shutter button.

  2. Repairing Canon PowerShot Lens Error E-18: passo 2, immagine 1 di 1
    • Replace the batteries in the camera.

    • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

    • Remove the old batteries from the camera and wait a few moments.

    • Put in a fresh set of batteries.

    • Close battery slide and power camera back on.

  3. Repairing Canon PowerShot Lens Error E-18: passo 3, immagine 1 di 1
    • Put blow dryer in the "no heat" setting prior to plugging it in.

    • Plug in and turn the blow dryer on.

    • Blow air in the gaps between the lens.

Conclusione

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Tim

Membro da: 01/06/11

172 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 7-31, Regan Winter 2011 Membro di Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 Membri

12 Guide realizzate

Un commento

merci! mon appareil fonctionne à nouveau

nadia.labadi - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 83

Tutti i Tempi: 5,900