Introduzione

Outline what you are going to teach someone how to do.

Parti

Nessuna parte richiesta.

Remove 3 screws running along back edge of case cover. Remove 2 screws from each side of case cover.
  • Remove 3 screws running along back edge of case cover.

  • Remove 2 screws from each side of case cover.

Aggiungi Commento

Grab edges of cover, pull outward slightly, and pull straight up.
  • Grab edges of cover, pull outward slightly, and pull straight up.

Aggiungi Commento

Be sure case cover has been removed prior to back panel removal. Remove 5 screws from panel, as shown.
  • Be sure case cover has been removed prior to back panel removal.

  • Remove 5 screws from panel, as shown.

Aggiungi Commento

Use flat-head screwdriver to push in square tabs, located on each side of the back panel. Use caution, the edges are sharp.
  • Use flat-head screwdriver to push in square tabs, located on each side of the back panel.

  • Use caution, the edges are sharp.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kevin

Membro da: 26/04/2011

351 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 18-20, Garner Spring 2011 Membro di Cal Poly, Team 18-20, Garner Spring 2011

CPSU-GARNER-S11S18G20

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 9

Tutti i Tempi: 1,944