Introduzione

This guide will focus on removing the back cover of the upper part of the phone. This will allow the user to access many of the other parts of the phone, including the motherboard, the keypad, the antenna, and the speaker.

Parti

Nessuna parte richiesta.

Orient the phone so that the phone model and other descriptive information is facing upward. Locate the two silver screws near the hinge where the battery is housed.
  • Orient the phone so that the phone model and other descriptive information is facing upward.

  • Locate the two silver screws near the hinge where the battery is housed.

  • Remove the silver screws using a Phillips head #2 screwdriver.

Aggiungi Commento

Pull off the back panel of the phone. Make sure you pull the cover off carefully in order to prevent damage to the back cover. Make sure you pull the cover off carefully in order to prevent damage to the back cover.
  • Pull off the back panel of the phone.

  • Make sure you pull the cover off carefully in order to prevent damage to the back cover.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Elizabeth Kelly

Membro da: 22/10/2012

501 Reputazione

10 Guide realizzate

Team

Clemson, Team 15-1, Benson Fall 2012 Membro di Clemson, Team 15-1, Benson Fall 2012

CLEM-BENSON-F12S15G1

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 45

Tutti i Tempi: 850