Salta al contenuto principale

Removing Texas Instruments TI-92 Back Cover

  1. Removing Texas Instruments TI-92 Back Cover, Back Cover: passo 1, immagine 1 di 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: passo 1, immagine 2 di 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: passo 1, immagine 3 di 3
    • The first step to any repair operation is to remove the front cover.

    • Grab the back of the calculator with one hand and the cover with the other.

    • Pull the cover off from one of the sides for easy removal.

  2. Removing Texas Instruments TI-92 Back Cover: passo 2, immagine 1 di 2 Removing Texas Instruments TI-92 Back Cover: passo 2, immagine 2 di 2
    • Orientate the calculator with the top facing towards you.

    • Slide the locking tab,found on the top part of the calculator, to the unlock position.

  3. Removing Texas Instruments TI-92 Back Cover: passo 3, immagine 1 di 2 Removing Texas Instruments TI-92 Back Cover: passo 3, immagine 2 di 2
    • "Locking Tab"

    • To remove the back cover, slide the cover away from the locking tab towards the bottom of the calculator until the cover no longer slides.

    • Then with the front of the calculator facing down, pull up on the back cover.

    • The calculator should now be orientated with the front facing down, as shown in picture 2.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 15-51, Garner Spring 2010 Membro di Cal Poly, Team 15-51, Garner Spring 2010

CPSU-GARNER-S10S15G51

5 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 12

Tutti i Tempi: 3,273