Salta al contenuto principale

Magellan RoadMate 1200 Back Cover Replacement

Cosa ti serve

  1. Magellan RoadMate 1200 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 2 Magellan RoadMate 1200 Back Cover Replacement, Back Cover: passo 1, immagine 2 di 2
    • Remove the four rubber caps from the back by using the Phillips #00 screwdriver.

  2. Magellan RoadMate 1200 Back Cover Replacement: passo 2, immagine 1 di 1
    • Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.

  3. Magellan RoadMate 1200 Back Cover Replacement: passo 3, immagine 1 di 2 Magellan RoadMate 1200 Back Cover Replacement: passo 3, immagine 2 di 2
    • Remove the back cover from the device by separating the back cover along its seam.

    • Slowly lift the cover—the speaker is screwed onto the back cover and is connected to the circuit board.

  4. Magellan RoadMate 1200 Back Cover Replacement: passo 4, immagine 1 di 2 Magellan RoadMate 1200 Back Cover Replacement: passo 4, immagine 2 di 2
    • Pull the speaker cord, horizontally, by its base, away from the motherboard.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Ross Light

Membro da: 04/12/10

217 Reputazione

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 3,467