Introduzione

This guide will demonstrate removing the computer's processor.

Parti

Nessuna parte richiesta.

Place the case on its side.
  • Place the case on its side.

  • Locate and remove the two 13.1 mm thumbscrews.

Aggiungi Commento

Slide the side panel towards the back and remove.
  • Slide the side panel towards the back and remove.

Aggiungi Commento

Locate the processor's heat sink and fan.
  • Locate the processor's heat sink and fan.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Remove the fan's power cable from the motherboard.
  • Remove the fan's power cable from the motherboard.

Aggiungi Commento

Locate and unscrew the four Phillips #0 screws at the corners of the fan.
  • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

  • The screws will not come out completely.

Aggiungi Commento

Remove the fan and heat sink.
  • Remove the fan and heat sink.

Aggiungi Commento

Gently press down and release the silver lever.
  • Gently press down and release the silver lever.

Aggiungi Commento

Open the metal casing over the processor.
  • Open the metal casing over the processor.

Aggiungi Commento

Gently lift up the processor, holding by the edges only.
  • Gently lift up the processor, holding by the edges only.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

Altre 9 persone hanno completato questa guida.

James Aldag

Membro da: 20/10/2011

327 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 6-8, Regan Fall 2011 Membro di Cal Poly, Team 6-8, Regan Fall 2011

CPSU-REGAN-F11S6G8

4 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 26

Tutti i Tempi: 6,752