Introduzione

The purpose of this guide is to demonstrate how to locate and remove the 1150 Wireless MiniPCI Card.

Parti

Nessuna parte richiesta.

Turn the laptop upside down and  locate the panel labeled C. Unscrew the single screw holding the cover in place. lift up the cover and remove it to exposed the Wireless MiniPCI Card.
  • Turn the laptop upside down and locate the panel labeled C.

  • Unscrew the single screw holding the cover in place.

  • lift up the cover and remove it to exposed the Wireless MiniPCI Card.

Aggiungi Commento

Using a plastic spudger or similar, gently pry the grey and black wires off. The grey and black wires are the antenna wires so be careful not to damage them
  • Using a plastic spudger or similar, gently pry the grey and black wires off.

  • The grey and black wires are the antenna wires so be careful not to damage them

  • Gently pull the retaining clips away from the board so that the board pops up.

Aggiungi Commento

Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees
  • Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Teja

Membro da: 27/04/2010

98 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 16-2, Maness Spring 2010 Membro di Cal Poly, Team 16-2, Maness Spring 2010

CPSU-MANESS-S10S16G2

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 5,449