Introduzione

This guide will be an overview of how to remove and replace a seat cushion. The seat post must be removed from the bicycle frame before a new seat cushion can be added.

Remove the seat by loosening the seat clamp (marked in the picture). Loosen the seat clamp by pulling the black lever away from the frame and then by rotating it counter-clockwise. Stand on the right side of the bike while loosening the lever, be sure the bike isn't upside-down. Stand on the right side of the bike while loosening the lever, be sure the bike isn't upside-down.
  • Remove the seat by loosening the seat clamp (marked in the picture). Loosen the seat clamp by pulling the black lever away from the frame and then by rotating it counter-clockwise.

  • Stand on the right side of the bike while loosening the lever, be sure the bike isn't upside-down.

Aggiungi Commento

Hold the seat tight, and pull up on the seat slowly and firmly to remove it from the frame. Now you are ready to remove your seat cushion from your seat post. Hold the seat tight, and pull up on the seat slowly and firmly to remove it from the frame. Now you are ready to remove your seat cushion from your seat post.
  • Hold the seat tight, and pull up on the seat slowly and firmly to remove it from the frame. Now you are ready to remove your seat cushion from your seat post.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Unscrew the bolt that holds the seat cushion itself to the seat post by using an Allen wrench to turn the bolt in a counter-clockwise direction. Unscrew the bolt that holds the seat cushion itself to the seat post by using an Allen wrench to turn the bolt in a counter-clockwise direction. Unscrew the bolt that holds the seat cushion itself to the seat post by using an Allen wrench to turn the bolt in a counter-clockwise direction.
  • Unscrew the bolt that holds the seat cushion itself to the seat post by using an Allen wrench to turn the bolt in a counter-clockwise direction.

Aggiungi Commento

Once you have successfully loosen the bolt, pull the seat post free of both the seat cushion and the two riders that sit on the cushion's rails. You should have two separate riders, as shown in the middle picture. Pull both the riders off of the cushion's rails. You have successfully removed your seat cushion from your bicycle frame. Congratulations!
  • Once you have successfully loosen the bolt, pull the seat post free of both the seat cushion and the two riders that sit on the cushion's rails.

  • You should have two separate riders, as shown in the middle picture. Pull both the riders off of the cushion's rails.

  • You have successfully removed your seat cushion from your bicycle frame. Congratulations!

Aggiungi Commento

Conclusione

To reassemble your device and install the new seat cushion, follow these instructions in reverse order with the new seat cushion instead of the old one.

Un'altra persona ha completato questa guida.

Dante Bozzini

Membro da: 26/09/2012

35 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 7-49, Forte Fall 2012 Membro di Cal Poly, Team 7-49, Forte Fall 2012

CPSU-FORTE-F12S7G49

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,443