Introduzione
Install an Airport Extreme 802.11g card internally.
-
Use a coin to turn the battery locking screw 90 degrees clockwise.
-
Lift the battery out of the computer.
-
Flip down the door on the right side of the battery compartment.
-
Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.
-
Grasp the plastic tab and pull the card out all the way.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 14 persone hanno completato questa guida.
