Introduzione

This processor board also includes L2 cache. It is not soldered to the logic board, so installing a replacement is very easy.

Turn the computer so that the ports are facing you.
  • Turn the computer so that the ports are facing you.

  • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

Aggiungi Commento

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

Aggiungi Commento

Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
  • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

  • In order to replace the keyboard, you must first remove the modem.

Aggiungi Commento

Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.
  • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

Aggiungi Commento

Lift the heat shield up and pull it toward you.
  • Lift the heat shield up and pull it toward you.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Aggiungi Commento

Pull the battery cable directly up from the logic board.
  • Pull the battery cable directly up from the logic board.

Aggiungi Commento

Remove the battery from its holder by pulling up and to the left.
  • Remove the battery from its holder by pulling up and to the left.

Aggiungi Commento

Remove the two silver Phillips screws from the modem.
  • Remove the two silver Phillips screws from the modem.

Aggiungi Commento

Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.
  • Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.

Aggiungi Commento

Disconnect the cable from the right side of the modem.
  • Disconnect the cable from the right side of the modem.

Aggiungi Commento

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Aggiungi Commento

Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.
  • Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.

Aggiungi Commento

Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.
  • Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.

  • This step is out of sequence with the keyboard because in order to remove the keyboard you must first remove the modem.

Aggiungi Commento

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Documenti Allegati

iRobot

Membro da: 24/09/2009

1 Reputazione

750 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 5,423