Introduzione

In order to access the display or replace any portion of the sound system you must first remove the speaker panel from the computer.

Parti

Nessuna parte richiesta.

Close the screen and turn the PowerBook over. Orient the computer so the text of the label is right side up.
  • Close the screen and turn the PowerBook over. Orient the computer so the text of the label is right side up.

Aggiungi Commento

Press and hold the button on the left of the front side and slide the battery out. Press and hold the button on the left of the front side and slide the battery out.
  • Press and hold the button on the left of the front side and slide the battery out.

Aggiungi Commento

With a T8 torx screwdriver, remove the three 24mm torx screws along the middle of the back panel.
  • With a T8 torx screwdriver, remove the three 24mm torx screws along the middle of the back panel.

Aggiungi Commento

Turn the computer over and open the display. You should see that the keyboard is loose. Before attempting to remove the keyboard, note that a ribbon cable connects  the keyboard to the logic board. Improper removal may damage your keyboard. Carefully lift the front of the keyboard up slightly and then slide the keyboard towards yourself.
  • Turn the computer over and open the display. You should see that the keyboard is loose.

  • Before attempting to remove the keyboard, note that a ribbon cable connects the keyboard to the logic board. Improper removal may damage your keyboard.

  • Carefully lift the front of the keyboard up slightly and then slide the keyboard towards yourself.

  • Then carefully lift the top half of the keyboard and rotate it towards yourself.

Aggiungi Commento

Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port. Gently remove the ribbons from its tabs
  • Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port.

  • Gently remove the ribbons from its tabs

Aggiungi Commento

Gently wiggle the RAM card to loosen the connection until it pulls free. Gently wiggle the RAM card to loosen the connection until it pulls free.
  • Gently wiggle the RAM card to loosen the connection until it pulls free.

Aggiungi Commento

Disconnect the wires from the port. Disconnect the wires from the port.
  • Disconnect the wires from the port.

Aggiungi Commento

Remove the 7mm screw connecting the speaker panel to the computer.
  • Remove the 7mm screw connecting the speaker panel to the computer.

Aggiungi Commento

To detach the speaker panel's ribbon cable, use a plastic opening tool to lift the tabs on both sides of the cable port. Once loose, pull the ribbon cable free.
  • To detach the speaker panel's ribbon cable, use a plastic opening tool to lift the tabs on both sides of the cable port.

  • Once loose, pull the ribbon cable free.

Aggiungi Commento

Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself. Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself.
  • Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 24-59, Amido Spring 2011 Membro di Cal Poly, Team 24-59, Amido Spring 2011

CPSU-AMIDO-S11S24G59

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,318