Aggiusta la tua roba Comunità Store

PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

Introduzione

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

Cosa ti serve

Panoramica Video

  1. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): passo 1, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): passo 1, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): passo 1, immagine 3 di 3

    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    Traduci

  2. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 2, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 2, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 2, immagine 3 di 3

    • To remove the power supply, first disconnect the two cables, then the 2 Phillips screws. Then lift it upwards.

    Traduci

  3. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 3, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 3, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 3, immagine 3 di 3

    • Separate cables, unscrew the screw and remove the Blu Ray drive.

    • Depending on the model of your PS3 Slim, the number of cables to be removed may vary between 2 and 4. If your model has more than one ribbon cable, remove the drive very carefully, as a fourth ribbon cable may be hidden underneath.

    Traduci

  5. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 4, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 4, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 4, immagine 3 di 3

    • Disassemble the upper metal shield by first unscrewing the 3 Phillips screws.

    • On the 2-cables model, you'll need to unscrew an additional 2 small Phillips screws, located on the underside of the drive. While you're at it, unscrew the 2 other Phillips screws at the bottom of the shield. (Their presence does not prevent removal of the upper metal shield, but removing them will be useful later).

    Traduci

  6. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 5, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 5, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 5, immagine 3 di 3

    • For the 2-cables model, remove the two very small phillips screws in each lower corner referenced by the red circles.

    • For the 4-cables model, remove the small Phillips screw in the bottom left corner referenced by the red circle.

    Traduci

  7. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 6, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 6, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 6, immagine 3 di 3

    • Carefully remove the plastic shell, paying attention to the cable that runs through it for the 4-cables model.

    Traduci

  8. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 7, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 7, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 7, immagine 3 di 3

    • Remove the 4 Phillips screws at each corner of the laser mechanism.

    • Then remove the mechanism.

    Traduci

  9. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 8, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 8, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 8, immagine 3 di 3

    • If necessary, transfer parts and screws from the old mechanism to the new one.

    Traduci

  10. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 9, immagine 1 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 9, immagine 2 di 3 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: passo 9, immagine 3 di 3

    • You can test the console before full assembling.

    • To do this, reassemble the blu-ray drive, reconnect its cables, and reconnect the power supply.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 16 persone hanno completato questa guida.

Autore

con 8 altri collaboratori

ZFix

Membro da: 12/09/13

191.182 Reputazione

330 Guide realizzate

Distintivi: 35

+32 altri distintivi

Team

Master Techs Membro di Master Techs

Community

322 Membri

2.520 Guide realizzate

Un commento

Do you know what the part number is for the deck? I don’t want to buy the wrong one. Thanks.

Edmond Charrette - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 46

Ultimi 30 Giorni: 271

Tutti i Tempi: 28,692