Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
  • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

  • Caution with the "Do not void" seal, underneath is also a screw

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
If all screws are removed. Use a metal spunger to open the chassis
  • If all screws are removed.

  • Use a metal spunger to open the chassis

Aggiungi Commento

Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
  • Slip the three cables out of the sockets.

  • Use a PH01 screwdriver to remove the four screws securing the optical drive

  • Lift up the optical drive and remove the duct tape under the flex cable.

  • Now the optical drive is free and ready for replacement

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

tlroesner

Membro da: 13/05/2012

1.697 Reputazione

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 115

Tutti i Tempi: 14,555