Introduzione

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

Ensure the headset is in the base's cradle.
  • Ensure the headset is in the base's cradle.

Aggiungi Commento

Press the volume control buttons on the back of the base until the front of the base flashes red.
  • Press the volume control buttons on the back of the base until the front of the base flashes red.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Press the mute switch on top of the headset until the green light on the headset turns on.
  • Press the mute switch on top of the headset until the green light on the headset turns on.

Aggiungi Commento

Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.
  • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

Aggiungi Commento

When the flashing red light becomes solid, synchronization is complete.
  • When the flashing red light becomes solid, synchronization is complete.

Aggiungi Commento

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Joe

Membro da: 12/04/2012

61 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 17-29, Amido Spring 2012 Membro di Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,628