Aggiusta la tua roba Comunità Store

Planet Eclipse Etha Eyes Replacement

Introduzione

The Etha's Eyes determine there is a ball in the chamber before firing. This guide is useful for players who choose to upgrade their eyes, or for players who have a marker with broken eyes.

Cosa ti serve

  1. Planet Eclipse Etha Eyes Replacement, Regulator: passo 1, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement, Regulator: passo 1, immagine 2 di 2

    • Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.

    • Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.

    • The macroline is the black hose connecting the regulator to the tank connection.

    Traduci

  2. Planet Eclipse Etha Eyes Replacement: passo 2, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement: passo 2, immagine 2 di 2

    • Remove the regulator by unscrewing it in a clockwise direction.

    Traduci

  3. Planet Eclipse Etha Eyes Replacement, Battery and Grip Panels: passo 3, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement, Battery and Grip Panels: passo 3, immagine 2 di 2

    • Use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

    • If you are only replacing the battery, skip the next step.

    • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

    Traduci

  4. Planet Eclipse Etha Eyes Replacement: passo 4, immagine 1 di 1

    • Flip the marker over and use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

    Traduci

  6. Planet Eclipse Etha Eyes Replacement: passo 5, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement: passo 5, immagine 2 di 2

    • Carefully remove the 9V battery and connector.

    • Remove the 9V battery from the connector.

    Traduci

  7. Planet Eclipse Etha Eyes Replacement, Frame: passo 6, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement, Frame: passo 6, immagine 2 di 2

    • Carefully disconnect the three connectors from the circuit board.

    • Don't worry about remembering which direction the connectors go in, they will not fit in the board in the wrong direction.

    Traduci

  8. Planet Eclipse Etha Eyes Replacement: passo 7, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement: passo 7, immagine 2 di 2

    • Use the 1/8" hex key to remove the two dome-headed screws by rotating them counter-clockwise.

    Traduci

  9. Planet Eclipse Etha Eyes Replacement: passo 8, immagine 1 di 1

    • Be very careful during the step to avoid damage to the solenoid or wiring.

    • Gently separate the top and bottom of the marker.

    Traduci

  10. Planet Eclipse Etha Eyes Replacement, Eyes: passo 9, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement, Eyes: passo 9, immagine 2 di 2

    • Use the 5/64" hex key to turn the screw counterclockwise.

    • Carefully remove the screw and place it off to the side.

    • Remove the panel and place it off to the side.

    Traduci

  11. Planet Eclipse Etha Eyes Replacement: passo 10, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement: passo 10, immagine 2 di 2

    • Carefully flip the marker over.

    • Use the 5/64" hex key to turn the screw counterclockwise.

    • Remove the screw and place it off to the side.

    • Carefully remove the panel and place it off to the side.

    Traduci

  12. Planet Eclipse Etha Eyes Replacement: passo 11, immagine 1 di 2 Planet Eclipse Etha Eyes Replacement: passo 11, immagine 2 di 2

    • Grip the marker with one hand and gently pull the eyes out with your other hand.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Hannah Lancaster

Membro da: 10/14/14

132 Reputazione

1 Guida realizzata

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team 10-42, Amido Fall 2014 Membro di Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,197