Introduzione

Removing the grip panels allows you to change the battery and allows you to remove the frame, which gives access to more parts of the marker.

Parti

Nessuna parte richiesta.

Use the 5/64" hex key to remove the screw shown. Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
  • Use the 5/64" hex key to remove the screw shown.

  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

  • If you are only replacing the battery, skip the next step.

  • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

Aggiungi Commento

Flip the marker over and use the 5/64" hex key to remove the screw shown.
  • Flip the marker over and use the 5/64" hex key to remove the screw shown.

  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

Aggiungi Commento

Carefully remove the 9V battery and connector. Remove the 9V battery from the connector.
  • Carefully remove the 9V battery and connector.

  • Remove the 9V battery from the connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jared Olson

Membro da: 14/10/2014

205 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 10-42, Amido Fall 2014 Membro di Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 13

Tutti i Tempi: 665