Philips TAS7505 Battery Replacement

Introduzione

This guide provides detailed instructions on how to remove and replace the battery from your Philips TAS7505 Speaker. It is vital to understand that this procedure requires you to detach the outside shell of the speaker, which may not reattach well. Proceed with caution.

Replacing worn-out batteries is crucial to maintaining the longevity of your speaker. By replacing the battery, you can ensure that the speaker continues to function optimally and extends its lifespan. If you do not mind minor cosmetic changes to your speaker, this procedure should not cause any issues.

Cosa ti serve

Passo 1 Battery

Philips TAS7505 Battery Replacement, Battery: passo 1, immagine 1 di 3

Philips TAS7505 Battery Replacement, Battery: passo 1, immagine 2 di 3

Philips TAS7505 Battery Replacement, Battery: passo 1, immagine 3 di 3

Remove the rubber dampener from the bottom of the speaker using your opening tool.
However, this will make it harder to replace the rubber dampener, and it may not stick. It is not necessary to the speaker's function.

Traduci

Passo 2

Philips TAS7505 Battery Replacement: passo 2, immagine 3 di 3

Remove the four Phillips #0 screws attached to the cover and remove with the opening tool.

Traduci

Passo 3

Remove all Phillips #0 screws to remove the final layers to open the inside.

Traduci

Passo 4

Remove the battery from the motherboard.
The cable that connects the battery to the speaker is attached to small pins. You can use your hands to wiggle the battery out.

Traduci