Salta al contenuto principale

Palm Zire 31 Case Replacement

Cosa ti serve

  1. Palm Zire 31 Case Replacement, Case: passo 1, immagine 1 di 1
    • Unscrew the two 7.35mm Torx T6 screws.

  2. Palm Zire 31 Case Replacement: passo 2, immagine 1 di 1
    • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

  3. Palm Zire 31 Case Replacement: passo 3, immagine 1 di 1
    • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

  4. Palm Zire 31 Case Replacement: passo 4, immagine 1 di 1
    • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Antonio

Membro da: 01/23/11

101 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 5-21, Amido Winter 2011 Membro di Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,353