Introduzione

Use this guide to replace the battery on a Palm Zire 21.

Remove the two 0.8mm screws located on the back of the device. Remove the two 0.8mm screws located on the back of the device.
  • Remove the two 0.8mm screws located on the back of the device.

Aggiungi Commento

Remove the back cover from the device exposing the battery. Remove the back cover from the device exposing the battery. Remove the back cover from the device exposing the battery.
  • Remove the back cover from the device exposing the battery.

Aggiungi Commento

Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.
  • Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.

Aggiungi Commento

Carefully remove the battery from the motherboard.
  • Carefully remove the battery from the motherboard.

Aggiungi Commento

Unwrap the old battery from electrical tape and replace with new battery.
  • Unwrap the old battery from electrical tape and replace with new battery.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 11

Tutti i Tempi: 751