Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Aggiungi Commento

Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Aggiungi Commento

Remove the stylus from the phone.
  • Remove the stylus from the phone.

Aggiungi Commento

After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)
  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

Aggiungi Commento

Using the spudger, remove the small rubberized patch under the antenna.
  • Using the spudger, remove the small rubberized patch under the antenna.

Aggiungi Commento

Unscrew the last two screws using the previous screw driver.
  • Unscrew the last two screws using the previous screw driver.

Aggiungi Commento

Using the plastic opening tool, gently separate the back case from the phone body. Using the plastic opening tool, gently separate the back case from the phone body.
  • Using the plastic opening tool, gently separate the back case from the phone body.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

James Smith

Membro da: 27/04/2012

1 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 12-37, Regan Spring 2012 Membro di Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 566