Salta al contenuto principale

Palm P101UNA Camera Screen Replacement

Cosa ti serve

  1. Palm P101UNA Camera Screen Replacement, Battery: passo 1, immagine 1 di 1
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Palm P101UNA Camera Screen Replacement: passo 2, immagine 1 di 1
    • Remove the battery by pulling out the little tab.

  3. Palm P101UNA Camera Screen Replacement, Camera Screen: passo 3, immagine 1 di 1
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  4. Palm P101UNA Camera Screen Replacement: passo 4, immagine 1 di 1
    • Using the spudger, remove the inner case from the phone.

  5. Palm P101UNA Camera Screen Replacement: passo 5, immagine 1 di 1
    • Now place your finger on the outside of the screen and slowly apply pressure.

  6. Palm P101UNA Camera Screen Replacement: passo 6, immagine 1 di 1
    • While applying pressure, use your tweezers to remove the screen from the inner casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

ironwill13791

Membro da: 10/30/13

509 Reputazione

5 Guide realizzate

Team

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 Membro di UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G2

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 340