Introduzione

Installing a new motherboard assembly which contains the processor and software package.

Parti

Nessuna parte richiesta.

Place the Palm IIIx face down on a flat surface.
  • Place the Palm IIIx face down on a flat surface.

Aggiungi Commento

Push down, lift up on, and remove battery cover.
  • Push down, lift up on, and remove battery cover.

Aggiungi Commento

Remove the old batteries one at a time.
  • Remove the old batteries one at a time.

Aggiungi Commento

Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
  • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

Aggiungi Commento

Hold the device on its side, positioning your hands as shown.
  • Hold the device on its side, positioning your hands as shown.

  • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers.

Aggiungi Commento

Hold the screen and front cover on its side, facing the screen inward as shown.
  • Hold the screen and front cover on its side, facing the screen inward as shown.

  • Position your hands so that you can push the screen outward with your thumbs.

  • Remove the screen by pushing outward with your thumbs. Use your index fingers to hold the front cover in place.

Aggiungi Commento

Position the device with the screen facing down. Locate the white ribbon wire on the left hand side of the device.
  • Position the device with the screen facing down.

  • Locate the white ribbon wire on the left hand side of the device.

  • On either side of the ribbon wire are two white clasps. Gently push the two clasps away from the board (to the left).

Aggiungi Commento

Detach the ribbon wire by gently pulling it out of its connector.
  • Detach the ribbon wire by gently pulling it out of its connector.

Aggiungi Commento

Separate the motherboard from the screen.
  • Separate the motherboard from the screen.

Aggiungi Commento

Now the motherboard assembly can be replaced successfully.
  • Now the motherboard assembly can be replaced successfully.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ben Johnson

Membro da: 26/01/2010

22 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 14-43, Regan Winter 2010 Membro di Cal Poly, Team 14-43, Regan Winter 2010

CPSU-REGAN-W10S14G43

5 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,700