Parti

Nessuna parte richiesta.

Tool on left - PH000 screwdriver
  • Tool on left - PH000 screwdriver

  • Tool on right - iPod fix-it tool

  • Soldering Iron

Aggiungi Commento

Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.
  • Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.

Aggiungi Commento

Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it. Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it.
  • Locate the gray band that you removed the screws from; this holds the two halves of the camera together. Use an iPod fix-it tool to pry the gray band loose and remove it.

Aggiungi Commento

Use the iPod fix-it tool to separate the back panel from the camera.
  • Use the iPod fix-it tool to separate the back panel from the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Travis Buck

Membro da: 25/09/2012

107 Reputazione

2 Guide realizzate

Team

Ohio State, Team 1-2, Buehl Fall 2012 Membro di Ohio State, Team 1-2, Buehl Fall 2012

OSU-BUEHL-F12S1G2

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 606