Aggiusta la tua roba Comunità Store

Olympus Camedia D560 Rear Panel Control Buttons Replacement

Introduzione

Step by step instructions to clean or replace the control buttons on the camera.

Cosa ti serve

  1. Olympus Camedia D560 Rear Panel Control Buttons Replacement, Rear Panel Control Buttons: passo 1, immagine 1 di 2 Olympus Camedia D560 Rear Panel Control Buttons Replacement, Rear Panel Control Buttons: passo 1, immagine 2 di 2

    • Before disassembling your camera, be sure it is powered off.

    • Remove two screws from the video port located at the side panel of the camera.

    • Remove three screws from the bottom panel of the camera.

    Traduci

  2. Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 2, immagine 1 di 2 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 2, immagine 2 di 2

    • Open the USB port cover, and remove three screws from inside.

    • Next, open the memory slot cover and remove the screw.

    Traduci

  4. Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 3, immagine 1 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 3, immagine 2 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 3, immagine 3 di 3

    • Use the blue opening tool to loosen and separate the back cover from the camera.

    Traduci

  5. Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 4, immagine 1 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 4, immagine 2 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 4, immagine 3 di 3

    • Locate and unscrew the three screws inside the back cover body (picture 3) .

    • Remove button pad assembly from the back cover.

    Traduci

  6. Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 5, immagine 1 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 5, immagine 2 di 3 Olympus Camedia D560 Rear Panel Control Buttons Replacement: passo 5, immagine 3 di 3

    • The button assembly is now separate from the back cover.

    • Inspect for broken areas. Replace or clean the button parts.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,015