Introduzione

This guide will teach you how to disassemble the control box of the Oculus Rift DK1.

Parti

Nessuna parte richiesta.

Use a plastic opening tool to carefully pry off the four rubber feet from the control box. You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet. You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.
  • Use a plastic opening tool to carefully pry off the four rubber feet from the control box.

  • You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.

Aggiungi Commento

Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box. You can now remove the bottom lid of the control box. It should come apart easily. You can now remove the bottom lid of the control box. It should come apart easily.
  • Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box.

  • You can now remove the bottom lid of the control box. It should come apart easily.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Audrey Chan

Membro da: 12/01/2015

201 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 70-5, Forte Winter 2015 Membro di Cal Poly, Team 70-5, Forte Winter 2015

CPSU-FORTE-W15S70G5

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 293