Introduzione

This guide will show you how to access the screen on your OLPC XO 1.5.

Parti

Nessuna parte richiesta.

Place the laptop upside down with the handle away from you.
  • Place the laptop upside down with the handle away from you.

Aggiungi Commento

Slide the tabs out, towards the green edges,  to show the open lock symbol.
  • Slide the tabs out, towards the green edges, to show the open lock symbol.

    • The right tab will stay in place, but the left tab must be held in position while you remove the battery.

Aggiungi Commento

Lift the middle of the battery to remove it. Lift the middle of the battery to remove it. Lift the middle of the battery to remove it.
  • Lift the middle of the battery to remove it.

Aggiungi Commento

Turn the laptop so it is resting on its bottom. Open the laptop by rotating the green wings on the side up, then lifting the top half of the laptop. Rotate the top half of the laptop about 90 degrees.
  • Turn the laptop so it is resting on its bottom.

  • Open the laptop by rotating the green wings on the side up, then lifting the top half of the laptop.

  • Rotate the top half of the laptop about 90 degrees.

Aggiungi Commento

Turn the laptop upside down, so you can see the screws on the bottom of the top half. Remove the two 4mm screws with a Phillips #1 screwdriver.
  • Turn the laptop upside down, so you can see the screws on the bottom of the top half.

  • Remove the two 4mm screws with a Phillips #1 screwdriver.

  • Rotate the top half 180 degrees.

  • Remove the two 4mm screws with a Phillips #1 screwdriver.

Aggiungi Commento

Rotate the top of the laptop 90 degrees, so that it is facing you again.
  • Rotate the top of the laptop 90 degrees, so that it is facing you again.

  • Slide the green pieces off the device. They should come off easily.

Aggiungi Commento

Pull down on the white screen cover. It does not require much force. Remove the screen cover. The game pad on the left sometimes falls during this step.
  • Pull down on the white screen cover. It does not require much force.

  • Remove the screen cover.

  • The game pad on the left sometimes falls during this step.

Aggiungi Commento

Unscrew the four 7.62mm Phillips #1 screws on either side of the screen. The screen is still connected by ribbon cables. You can damage the cables if you remove the screen before disconnecting the cables.
  • Unscrew the four 7.62mm Phillips #1 screws on either side of the screen.

  • The screen is still connected by ribbon cables. You can damage the cables if you remove the screen before disconnecting the cables.

  • Move the screen down a little to expose the ribbon cables.

Aggiungi Commento

Flip up the tab right under the middle top of the screen. Pull the black ribbon cable out of the socket. Pull the black ribbon cable out of the socket.
  • Flip up the tab right under the middle top of the screen.

  • Pull the black ribbon cable out of the socket.

Aggiungi Commento

Flip up the smaller tab under the left side of the screen. Remove the small cable to separate the screen from the rest of the laptop.
  • Flip up the smaller tab under the left side of the screen.

  • Remove the small cable to separate the screen from the rest of the laptop.

  • Gently remove the screen.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew Ferrell

Membro da: 05/10/2012

21 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 3-19, Amido Fall 2012 Membro di Cal Poly, Team 3-19, Amido Fall 2012

CPSU-AMIDO-F12S3G19

6 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,887