Salta al contenuto principale

Nokia Classic 2600c-2b Motherboard Replacement

Cosa ti serve

  1. Nokia Classic 2600c-2b Motherboard Replacement, Motherboard: passo 1, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement, Motherboard: passo 1, immagine 2 di 2
    • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

    • Pull the phone apart from the bottom, keeping the button pressed down.

    • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

  2. Nokia Classic 2600c-2b Motherboard Replacement: passo 2, immagine 1 di 1
    • Remove the back cover to expose the battery.

  3. Nokia Classic 2600c-2b Motherboard Replacement: passo 3, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement: passo 3, immagine 2 di 2
    • Place a finger or plastic opening tool in the gap between the battery and the phone.

    • Gently lift the battery out.

  4. Nokia Classic 2600c-2b Motherboard Replacement: passo 4, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement: passo 4, immagine 2 di 2
    • Locate the plastic latches on the left and right sides of the phone.

    • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

    • Note: Some force is required

  5. Nokia Classic 2600c-2b Motherboard Replacement: passo 5, immagine 1 di 1
    • Remove the faceplate with the number pad attached.

  6. Nokia Classic 2600c-2b Motherboard Replacement: passo 6, immagine 1 di 1
    • Turn the faceplate so the number pad faces downward.

    • Lift the number pad out of the faceplate.

  7. Nokia Classic 2600c-2b Motherboard Replacement: passo 7, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement: passo 7, immagine 2 di 2
    • Locate the six screws positions along the edges of the motherboard.

    • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

    • CAUTION! Place the screws in a secure location.

  8. Nokia Classic 2600c-2b Motherboard Replacement: passo 8, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement: passo 8, immagine 2 di 2
    • Locate the orange ribbon tape connecting the metal display plate to the motherboard.

    • Lift the black latch attaching the tape to the motherboard.

    • Gently pull the tape out of the latch slot to remove the metal display.

  9. Nokia Classic 2600c-2b Motherboard Replacement: passo 9, immagine 1 di 2 Nokia Classic 2600c-2b Motherboard Replacement: passo 9, immagine 2 di 2
    • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

    • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

  10. Nokia Classic 2600c-2b Motherboard Replacement: passo 10, immagine 1 di 1
    • Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.

    • Gently pull the tape up to remove the display.

    • Replace the old motherboard with the new motherboard.

    • Follow the directions in reverse order to reassemble the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ian VanZandt

Membro da: 02/14/12

654 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 629