Introduzione

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Parti

Nessuna parte richiesta.

Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Aggiungi Commento

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Aggiungi Commento

Grip the front cover from the bottom.
  • Grip the front cover from the bottom.

Aggiungi Commento

Lift the front cover off.
  • Lift the front cover off.

Aggiungi Commento

Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Aggiungi Commento

Insert spudger along edge of assembly and gently lift assembly away from case
  • Insert spudger along edge of assembly and gently lift assembly away from case

Aggiungi Commento

Remove assembly from phone
  • Remove assembly from phone

Aggiungi Commento

The logic board now sits on top of the phone.
  • The logic board now sits on top of the phone.

Aggiungi Commento

Lift the logic board out of the phone.
  • Lift the logic board out of the phone.

Aggiungi Commento

Locate battery charger connector
  • Locate battery charger connector

Aggiungi Commento

Grasp top and bottom of battery charger connector on the left side
  • Grasp top and bottom of battery charger connector on the left side

Aggiungi Commento

Lift out the battery charger connector
  • Lift out the battery charger connector

Aggiungi Commento

Grasp vibrator which protrudes from the battery charger connector
  • Grasp vibrator which protrudes from the battery charger connector

Aggiungi Commento

Lift the vibrator out of the battery charger connector.
  • Lift the vibrator out of the battery charger connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Membro da: 05/10/2010

1 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 22-3, Maness Fall 2010 Membro di Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,075