Introduzione

This guide is to instruct the reader about the steps on replacing the internal antenna. The phone will have to be disassembled to reach to the antenna. A proper set of Torx (Star) screw-driver is necessary to complete the procedures.

Parti

Nessuna parte richiesta.

Press and hold the battery release button and slide the battery away from the Nokia logo Press and hold the battery release button and slide the battery away from the Nokia logo
  • Press and hold the battery release button and slide the battery away from the Nokia logo

Aggiungi Commento

Slide the SIM card lock away from the SIM card. The SIM card pops out. Remove the SIM card. The SIM card pops out. Remove the SIM card.
  • Slide the SIM card lock away from the SIM card.

  • The SIM card pops out. Remove the SIM card.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Unscrew and remove the four T6 Torx screws.
  • Unscrew and remove the four T6 Torx screws.

Needs updating with a picture with no SIM card.

Mustafa - Replica

A comment for anyone wanting to clean the metal contacts to improve keypad response, make sure you spray iso alcohol onto a lint free cloth and wipe the contacts, not onto the device itself and definitely not onto the LCD screen, as it can leave a marl on the screen. Luckily it evaporated eventually but only after 48hrs...

John - Replica

Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone. Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone. Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.
  • Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.

Aggiungi Commento

Use the plastic opening tool to separate the top part of the backplate. The plastic clips at the top require slightly more force to separate. The plastic clips at the top require slightly more force to separate.
  • Use the plastic opening tool to separate the top part of the backplate.

  • The plastic clips at the top require slightly more force to separate.

Aggiungi Commento

Remove the screw holding the antenna to the circuit board. Carefully lift off the antenna from the circuit board.
  • Remove the screw holding the antenna to the circuit board.

  • Carefully lift off the antenna from the circuit board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Wilson Tam

Membro da: 29/09/2010

47 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 14-41, Forte Fall 2010 Membro di Cal Poly, Team 14-41, Forte Fall 2010

CPSU-FORTE-F10S14G41

5 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 6,982