Introduzione

Reassemble the Nokia 6102i

Parti

Nessuna parte richiesta.

This step does not require much force. With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.
  • This step does not require much force.

  • With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.

Aggiungi Commento

Place the metal case over the top of the screen so that it snaps into place. Place the metal case over the top of the screen so that it snaps into place.
  • Place the metal case over the top of the screen so that it snaps into place.

Aggiungi Commento

Insert the circuitboard into the back of the phone, with the inside screen facing down. Lightly press down on the left hand corner so the circuitboard attaches to the phone. Lightly press down on the left hand corner so the circuitboard attaches to the phone.
  • Insert the circuitboard into the back of the phone, with the inside screen facing down.

  • Lightly press down on the left hand corner so the circuitboard attaches to the phone.

Aggiungi Commento

Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.
  • Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.

Aggiungi Commento

Open the phone and insert the screws tightly. Open the phone and insert the screws tightly.
  • Open the phone and insert the screws tightly.

Aggiungi Commento

This step does not require much force. Snap on the black piece over the exposed screws.
  • This step does not require much force.

  • Snap on the black piece over the exposed screws.

Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Danielle

Membro da: 27/09/2012

1 Reputazione

1 Guida realizzata

Team

Ohio State, Team 1-3, Buehl Fall 2012 Membro di Ohio State, Team 1-3, Buehl Fall 2012

OSU-BUEHL-F12S1G3

3 Membri

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 396