Introduzione

The time on your phone is always wrong, making you arrive at the wrong time. Switch out the internal clock battery and always be on time.

Parti

Nessuna parte richiesta.

Be sure cell phone is off before you begin to disassemble the phone. Press the button on the bottom of the back of the cell phone. Slide rear panel down and remove  it.
  • Be sure cell phone is off before you begin to disassemble the phone.

  • Press the button on the bottom of the back of the cell phone.

  • Slide rear panel down and remove it.

Aggiungi Commento

Using your fingernail, pry the back of the battery upwards and pull out. Using your fingernail, pry the back of the battery upwards and pull out. Using your fingernail, pry the back of the battery upwards and pull out.
  • Using your fingernail, pry the back of the battery upwards and pull out.

Aggiungi Commento

Insert the plastic opening tool under the faceplate. Separate the faceplate from main body by twisting the prying tool with some force. The faceplate is held by three plastic fasteners, so pry evenly on both sides of phone.
  • Insert the plastic opening tool under the faceplate.

  • Separate the faceplate from main body by twisting the prying tool with some force.

  • The faceplate is held by three plastic fasteners, so pry evenly on both sides of phone.

Aggiungi Commento

With the faceplate removed, simply peel off rubber key pad and remove. With the faceplate removed, simply peel off rubber key pad and remove. With the faceplate removed, simply peel off rubber key pad and remove.
  • With the faceplate removed, simply peel off rubber key pad and remove.

Aggiungi Commento

Locate and remove the six screws on the front of the phone using a T6 Torx. All 6 screws are 6.9mm long. All 6 screws are 6.9mm long.
  • Locate and remove the six screws on the front of the phone using a T6 Torx.

    • All 6 screws are 6.9mm long.

Aggiungi Commento

After removing screws, lift the motherboard assembly straight off the cell phone body. After removing screws, lift the motherboard assembly straight off the cell phone body. After removing screws, lift the motherboard assembly straight off the cell phone body.
  • After removing screws, lift the motherboard assembly straight off the cell phone body.

Aggiungi Commento

With the logic board completely removed, gently pry out the internal clock battery from its housing. With the logic board completely removed, gently pry out the internal clock battery from its housing.
  • With the logic board completely removed, gently pry out the internal clock battery from its housing.

Why do you call the built-in microphone "Internal clock battery"?

Алексей Пурис - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Curtis Lutje

Membro da: 07/10/2010

16 Reputazione

12 Guide realizzate

Team

Cal Poly, Team 20-8, Maness Fall 2010 Membro di Cal Poly, Team 20-8, Maness Fall 2010

CPSU-MANESS-F10S20G8

4 Membri

28 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,215