Introduzione

This guide will lead you through the steps needed to remove the keypad in your phone.

Parti

Nessuna parte richiesta.

Firmly grip the back of the casing. Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.
  • Firmly grip the back of the casing.

  • Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.

  • Be sure not to bend the casing too much when prying from the bottom. Failure to do so may cause it to crack.

Aggiungi Commento

Using the flat end of the spudger, push out the 4 rubber tabs on the back of the keypad to remove it.
  • Using the flat end of the spudger, push out the 4 rubber tabs on the back of the keypad to remove it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

JSwan

Membro da: 12/04/2013

517 Reputazione

12 Guide realizzate

Team

Cal Poly, Team 10-43, Amido Spring 2013 Membro di Cal Poly, Team 10-43, Amido Spring 2013

CPSU-AMIDO-S13S10G43

4 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 24

Tutti i Tempi: 1,480