Introduzione

Keeping your device water-proof is paramount in using it to its full potential. Follow this guide to replace the water-proofing O-ring.

Parti

Nessuna parte richiesta.

Grasp the clear cover and the white housing and twist the cover counter-clockwise.
  • Grasp the clear cover and the white housing and twist the cover counter-clockwise.

  • The lid may hold fast, but it will come off with some firm twisting.

Aggiungi Commento

Lift the lid from the device
  • Lift the lid from the device

  • It may be helpful to use a spudger to pry under the lid if there is difficulty in getting a good grip on the smooth plastic.

Aggiungi Commento

Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid
  • Using a plastic spudger, lift the o-ring from the lid

Aggiungi Commento

Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads
  • Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 93