Salta al contenuto principale

Nikon D3100 Lens Mounting Ring Reseating/Replacement

Cosa ti serve

  1. Nikon D3100 Lens Mounting Ring Reseating/Replacement, Lens Mounting Ring: passo 1, immagine 1 di 1
    • Remove the 6 Phillips screws on the front of the lens mounting ring.

  2. Nikon D3100 Lens Mounting Ring Reseating/Replacement: passo 2, immagine 1 di 1
    • Carefully lift the mounting ring straight up.

    • Three unfastened metal plates lie under the lens mounting ring, be very careful lifting it up as to not disturb them.

  3. Nikon D3100 Lens Mounting Ring Reseating/Replacement: passo 3, immagine 1 di 2 Nikon D3100 Lens Mounting Ring Reseating/Replacement: passo 3, immagine 2 di 2
    • Reseat or replace the lens mounting ring and reassemble.

    • The locating pin on the right of the camera will help place the mounting ring properly.

    • The small metal plates marked in the image are not fastened and may displace if the camera if tipped or bumped. Be sure these are properly in place before reassembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Taylor

Membro da: 01/30/15

1.165 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 16-6, Watkins Winter 2015 Membro di USF Tampa, Team 16-6, Watkins Winter 2015

USFT-WATKINS-W15S16G6

2 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 17

Tutti i Tempi: 4,079