Introduzione

If the battery is dead or the memory card is full, it must be changed or charged. In order to accomplish either they must be removed. This guide will show the reader how to simply remove either one.

Strumenti

Nessun attrezzo richiesto.

Parti

Slide the battery and memory card cover (located on the bottom of the camera) to release it.
  • Slide the battery and memory card cover (located on the bottom of the camera) to release it.

Aggiungi Commento

To release battery you must slide the orange hatch, once doing so the battery will pop up.
  • To release battery you must slide the orange hatch, once doing so the battery will pop up.

  • Remove with tweezers or your fingers.

Aggiungi Commento

To release the memory card, simply push down on the memory card and it will pop up as the battery did.
  • To release the memory card, simply push down on the memory card and it will pop up as the battery did.

  • You will be able to remove with your fingers.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Shauna

Membro da: 05/04/2011

750 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 12-32, Maness Spring 2011 Membro di Cal Poly, Team 12-32, Maness Spring 2011

CPSU-MANESS-S11S12G32

4 Membri

5 Guide realizzate

Thank you! If you're like me, the way you push the memory card registers as "in," not "down," but I got it out!

bonitakale - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 111

Tutti i Tempi: 16,158